GroutPro Glass Restore
GroutPro Glass Restore water spot remover effectively restores glass and other hard surfaces.
USES
GroutPro Glass Restore removes water staining, soap scum, salt deposits on glass, metal surfaces, ceramic hobs, tiles, porcelain and acrylic shower linings. Also removes light scratches, grease and rust.
DIRECTIONS
For Glass:
1- Apply to a white nylon safety pad. Create a border around the edge of the glass by hand. Once all the staining is removed around the edges and corners continue onto step 2.
2- Apply a small amount of GroutPro Glass Restore to the pad, start moving the pad in a spiral motion. Spray on a light mist of water and spread the product over the small section of the glass surface you are working on.
If you feel the layer of product is too thin, apply more GroutPro Glass Restore.
3- Allow a few minutes for the product to work its way into the surface of the glass. Dwell time can help soften the build-up, so leave the product on as for as long as practical.
4- Once you have removed all the staining and have restored the clarity back to the glass. Wipe the glass with water and a GroutPro micro-fibre cloth to remove any product residue. Check the glass surface for any stubborn water stains that wasn’t removed. Check by looking at the glass from several different angles. Repeat previous steps if necessary.
5- Apply Groutpro Glass Protector for long lasting results.
NOTE: Avoid scrubbing any trim around the glass as this can be scratched. Also avoid use on any tint films that may have been applied to glass, especially on windows in showers.
For Metal and Fibreglass: Apply directly to the surface with a soft cloth. Buff dry.
For Heavy Mineral Deposits: Use an orbital buffing machine. Apply white pad cut to size to buffer. Apply product to pad and work in small areas using a side to side, up and down motion. Buff dry. Repeat if necessary. Clean glass and apply GroutPro Glass Protector.
FIRST AID
Eye Contact: If eye(s) flush affected area with plenty of water, continue for 15 minutes.
Ingestion: If swallowed do NOT induce vomiting. Give a glass of water or milk. Seek medical attention.
Inhalation: If inhaled and irritation occurs and becomes painful, seek medical attention.
Skin Contact: Wash skin with soap and water. If irritation persists seek medical attention.
Use generally accepted safety precautions while operating polishers or buffing machines. User assumes all responsibilities and risk.
SAMPLE TESTING
Always test first according to directions to determine desired results.
KEEP OUT OF REACH OF CHILDREN
  Statement of Hazardous NatureThis product is classified as: Xi, Irritating. Hazardous according to the criteria of SWA. Not a Dangerous Good according to Australian Dangerous Goods (ADG) Code, IATA or IMDG/IMSBC criteria. SUSMP Classification: None allocated. ADG Classification: None allocated. Not a Dangerous Good according to Australian Dangerous Goods (ADG) Code, IATA or IMDG/IMSBC criteria. UN Number: None allocated DANGER
|
|
 |
|
